GE DMS Go+ A-Scan Basic Ultrasonic
Description
DMS Go+ Series Ultrasonic Thickness Gauge
The DMS Go+ Series of A-scan thickness gauges provides accurate, reliable, and comprehensive thickness inspection data in a wide range of applications and environments.
All three models – DMS Go+ Basic, DMS Go+, and DMS Go+ Advanced – feature intuitive, easy-to-use arrow-keypad control and carry out from simple A-scan verification to B-scan and full Data Recording. The three thickness gauges are easy to upgrade with additional features and capabilities in order to form a powerful and flexible NDT inspection tool that meets your corrosion thickness application needs.
The DMS Go+ Series uses the same operating platform and hardware as the state-of-the-art USM Go+ portable flaw detector. This offers the ability to have an A-scan thickness gauge and full-fledged flaw detector in one powerful & flexible instrument.
GE DMS Go+ A-Scan Basic Ultrasonic
The Krautkrämer DMS Go+ is suitable for thickness measurement in a wide variety of applications throughout the industrial and process spectrum. It is especially applicable for corrosion measurement and monitoring, even on coated components and structures and at high temperatures.
Typical applications include:
Oil & Gas
- Inspection and monitoring of corrosion in tubes, vessels, and tanks
- Measurement of remaining wall thickness through paint coatings
Power Generation
- Inspection of complex geometry tubes
- Monitoring of boiler efficiency by measuring oxide scale in boiler tubes with special probe OSS-10
Aerospace
- Maintenance checks
Metals Industry
- Thickness measurement of austenitic materials
Optional applications software such as TopCOAT technology, also allows measurement of coating thickness as well as metal thickness, while Auto-V measurement enables thickness to be measured on components with unknown sound velocities, without the need for a calibration block.
- Display 5 inch – 800 × 480 pixels, 108 × 65 mm (W x H), > 200 cd/m2
- Size (W x H x D) – 175 × 111 × 50 mm (W × H × D)
- Weight – 850 g with battery
- Protection class – IP 67
- Operating temperature – 0 – 55 °C
- Battery – Li-Ion, rechargeable, > 8 hours operation time
- Power adapter / charger – 100 – 240 V AC, 50/60 Hz
- Probe connector – Dual Lemo-00 (T/R)
- PC interface – Micro USB
- Memory card – SD-Card 16 GB max
- Datarecorder – 100.000 readings per file. Multiple files can be stored on SD card 8 file formats, Attachment of A-Scan, B-Scan and micro grid
- Pulser – 120 – 250 V, Spike wave, Automatically matched to probe
- Pulse Repetition Frequency – 4, 8 or 16 Hz selectable
- Receiver – 110 dB dynamic, automatic gain control, Manual –high, -low, -auto
- Measurement range – 0,4 – 14.000 m/s (0.01 – 551 “)
- Units – mm, inch, μs
- Digital Display resolution – 0,01 mm or 0,1 mm (0.001” or 0.01”) selectable
- Measurement techniques – Zero crossing, IP to 1st echo, multi echo, TopCoat, Auto-V
- Calibration – One-point, Two-point, Auto or Manual On-block and Off-block Zero, Automatic V-Path correction
- Display mode – Thickness and A-Scan, Temperature corrected thickness, B-Scan, Min/Max capture, Differential
- Compliance – EN 61010,EN 61326-1, EN 12668, ASTM E 1324, E317, ANSI/NCSL Z 540-1-1994, MIL-STD 45662A, MIL-STD 2154, EN 15317
There are no reviews yet.